Thursday, March 9, 2017

Furniture Fix # 1 - Chippy Table Frame + Pine Top

Project: Adding a table top to a Vintage Chippy Frame/legs

This was a long time to finish project.

Added a Dick and Jane Friends and Neighbours reader, Paddy the Beaver, a mid-century English Sadler 2 cup size teapot and a bib apron to the tablescape, a definite mixture of vintage. The table colour looks more green than pale grey in this photo, scroll down to the next picture for a more accurate colour.


The booth next to mine, Autumn Rose, sells wonderful vintage aprons and the (double lined) apron with just a touch of pale lilac made the dress form look prettier).

Added a Summer sign (dreaming of) and shells for another view of the tabletop finish.



The table frame and legs with flaking green under pink paint was stacked in the shed for about 3 years. 

Finally brought it into the house where it shed a lot of flakes on the carpet. Eventually found and added two coats of Fusion Tough Coat Sealer from Fusion Mineral Paint, which left the flakey look and kept the chippy paint chips on the legs and frame.

Frame sat for several months in the living room covered with a couple of boards and a towel.  




Below - Tough Coat and the grey Milk Paint powder



This is a view of the table when the Tough Coat sealer was applied/drying. It was resting on the pine top DH made for the cabinet in the kitchen.



Previously DH had glued/clamped/planed/routed the edges of 3 lengths of pine board together to make a cabinet top.



Then he found a great piece of wooden countertop at a garage sale and the piece of glued up pine was available for the table top project.

You see this wooden countertop view (below) in so many of my photo's.



Table frame had a few more months to wait but now it was covered by the pine ex-counter top piece and used as a project base, as a place to pile stuff, the usual uses for a flat surface. Always handy to have another surface available.


DH decided that the prepared pine top would work for the table top (with some changes). In late August (when I wasn't home to take pictures) he cut a piece off the large board and made one drop leaf, used some seriously old hinges (from our junk box) plus added a table drop-leaf support and stopper (small wooden piece attached under drop-leaf). I sealed (painted) the underneath the tabletop with a wash of light blue chalk paint.



DH's decision to add one drop leaf was based on an antique Bakers table with turned legs and one drop leaf, with a pine top, probably has old milk paint with the colour made from ox blood. This was his Mom's and it was very old when she bought it. Love the hinge and the age of the wood.



Back to the replacement table top project.

The table top was attached to the frame with metal brackets (see arrow). The word Schellley was written on the frame when it originally arrived and I left it alone.




I did experiment trying to match the colour of the legs and got fairly close.

Here is what I did to match the colour of the frame/legs to a pine board.

First tried pink and red chalk like paint thinned 1 paint to 2 water. Mixed, tested on a pine board (that had the grey chalk paint underpainting). This was not the right colour.

Next mixed pink and orange chalk like paint, 1:2 water, foam brushed onto the grey stained piece of pine board. Dried. Used clear then dark wax and wiped/polished when dry. The colour match was fairly good.


After looking at the colours against the table legs for several days the pinkish-orangish colour was just too intense for a current kitchen table top. 




Eventually I used the milk paint powder (grey) that I had picked up from a garage sale years and years ago. I mixed it 1 tsp power to 3 Tsp of cool water and stirred until smooth. That was my wash. 

Applied two coats of wash on the table top and all edges using a foam brush. Then the table sat, covered with a towel, used for projects or loaded with thrifted finds for another couple of months.

This March I finally decided that the light grey wash would be the table top colour and sealed the top with 3 coats of Minwax Satin Finish 360 Tudor, sanded very lightly before and after each coat. Enough was enough and I was finished with the small table.


It will be going over to my booth.



First upcycled furniture project of 2017.

Any products shown or written about were because I used them for my project, no other reason.

Another furniture fix coming soon. Hint below.



Thank you for visiting.

Featured by Beverly @ How Sweet The Sound

Sharing with



Saturday
Strawberry Butterscotch, Pam's Party and Practical Tips, Our Mini Family, One More Time Events, The 36th Avenue, Life on Lakeshore Drive Snickerdoodle Create Bake Make, The 36th Avenue

Sunday
Love of Home, Silver Pennies, DIY Showoff, Nifty Thrifty Things, Eclectic Red Barn, Rustic and Refined, Creating My Way to Success


Monday
What Meegan Makes, Two Purple Couches, Country Mouse City Mouse, Let's Add Sprinkles, Normandy Life, The Girl Creative, Coastal Charm, Grandma's Briefs, Home Stories A-Z, A Stroll Through Life

Tuesday
Stone Cottage Adventures, Fluster Buster, The Cookie Puzzle, Sweet Parish Place,

Wednesday 
The Thrifty Home, Suburban Simplicity, Raven would, The Essence of HomeOf Faeries and Fauna
Savvy Southern Style, Beyond The Picket Fence, Raggety Bits, To Grandma's House We Go


29 comments:

  1. I've got a huge pile of shells. Thought I knew what I was going to do with them. They look cute like this. I need to put mine to use.

    Found you thru Vintage Charm

    I use a lot of small shells for my mosaics
    and broken stuff, plates, pottery, etc.
    The big ones like this are too large for what I make

    like I said, thought I had an idea in mind
    used the space in the house where I was going to do that
    so now plan 2 needs to come into action

    I love that old vintage table and chairs

    ReplyDelete
  2. WOW! You turned that old table into a gorgeous piece! Great job!

    Judy

    ReplyDelete
  3. Nice work on the table. It's unique with just the one leaf. I used to have an oak one of a similar size with two leaves. I loved that old table. Can't remember what happened to it. I probably gave it to someone. It was just so versatile because you could change the size so easily by putting the leaves up or down. Wish I had it now. sigh

    ReplyDelete
  4. You do remarkable work. Jilda has a small crystal pitcher that her dad found at the car wash near wher he lived. It's one of the lat gifts he gave her before he died. She wrote about it in her monthly column in The Leaf.
    R

    ReplyDelete
  5. The route to complation on this table was a good read. And familiar. Sometimes we just need to wait and let the inspiration happen on its own. I sure related to that flat surface thing! I have to watch out for my hubby though because he can cause more damage in a few minutes than you would believe! Piling tools, using as a surface to paint on, etc. etc. Can't complain too much because he works so hard.

    ReplyDelete
  6. Thank you for sharing this post at the #WednesdayAIM #LinkUp #BlogParty. I shared it on Pinterest.

    ReplyDelete
  7. This table is obviously a labour of love and respect. This is my first time on your blog and your attention to detail and use of different products is a new concept for me. The final product is very lovely and quaint.

    ReplyDelete
  8. The table looks fantastic Joy. IT has a whole new life.

    ReplyDelete
  9. I've spent some time catching up with some of your back posts. I love the signs. The table, sign and apron in this post look great, too! I enjoy seeing all the things you do--so creative!

    ReplyDelete
  10. A labor of love! Great table. Happy Monday!

    ReplyDelete
  11. Talk about a work in progress! Well done on finally getting the table finished and doesn't it look fabulous. If you ever do take it to your booth (after all, you've been together for quite some time) I bet it won't be long before it walks away with a new owner.
    Happy Mosaic Monday from Normandy.

    ReplyDelete
  12. The drop leaf table turned out beautifully! I'm sure it will sell quickly. A great colour.

    ReplyDelete
  13. Joy, that was a job but it sure turned out nice--love the color you chose! Thanks for sharing @Vintage Charm!

    ReplyDelete
  14. I love seeing the progress of things and the colour is lovely - thank you for sharing he steps with us

    ReplyDelete
  15. It's so much fun to bring an old piece to life again!
    You did well and the result is great!
    I had a lovely old oval drop leaf table given to me by an Aunt, sadly it had borer it it so I had to get rid of it...I would love to find another and do what you've done!
    Shane

    ReplyDelete
  16. Oh this was great. What a wonderful job. And a great tutorial. Many of us need those 'how to's'! This weeks link is open. Come over to the Fabulous Party!
    http://ourholidayjourney.blogspot.com/2017/03/fabulous-springeaster-link-party-3.html
    Happy Spring.

    ReplyDelete
  17. Hello, I enjoyed seeing the progress on the table. It looks wonderful. I love the sign and the pretty shells. Enjoy your day and the week ahead!

    ReplyDelete
  18. Love the color you picked Joy. At first i thought the peachy color would work but then after seeing the final product, you were right. The grey is much better, I bet it doesn't hang out long in the booth!

    ReplyDelete
  19. Joy, I love your table set. Great color choice. You did a wonderful job.

    Happy Pink Saturday. Thank you for making Pink Saturday special. This post is being featured on my Pink Saturday post this week as "the one that caught my eye".♥

    ReplyDelete
  20. Thanks for sharing at Home Sweet Home!

    ReplyDelete
  21. What a great outcome. Sometimes it takes a while for a project to be completed but it is worth it in the end.

    ReplyDelete
  22. Big project, Joy!! So nice that your sweet husband helps you tackle these kinds of things :) Thanks so much for linking up with Vintage Charm--

    ReplyDelete
  23. Joy, I think the grey wash looks good on the table. I bet it is nice to finally get that project completed! Thanks for sharing with us at Snickerdoodle!

    ReplyDelete
  24. I love the gray wash! It looks lovely. And I love that collection of shells. Thank you for sharing at Link It Up Wednesday!

    ReplyDelete
  25. I love the two different finishes on this piece Joy, and that you kept the base in its original condition preserving its history, thanks for sharing your project at Fridays Furniture Fix!

    ReplyDelete
  26. The table is awesome! I like how you left the chippy look.

    ReplyDelete
  27. What a great fix. I hope it sells soon. Thanks for linking to Monday Social.

    ReplyDelete
  28. Thanks for sharing your project and tips. Love the outcome. Happy Pink Saturday.

    ReplyDelete
  29. Lovely piece! Thanks for sharing at To Grandma's House We Go link party.

    ReplyDelete

Thanks for visiting. I read and appreciate all your comments. Joy

Recent Posts